PRESENTING OUR ENDURA-CRAFT SQUARE FRETWORK COLUMN STYLES

Combining our traditional expanded cellular PVC column wraps with our wildly popular Fretwork Wall Panels, this product line makes a statement for both interior and exterior projects. Installed with E-Z Lock joints and then gluing the fretwork panels on, any DIYer will look like a professional carpenter in minutes. With over 50 panel patterns, 5 caps and bases, dozens of size combinations, and the ability to paint the columns and panels different colors, there is a Modern Fretwork Column for every project that wants something more without breaking the bank.

• Complete kit with column wrap, cap/base, & patterned fretwork panel
• 50 traditional & modern patterns
• Designed to wrap a post with quick “E-Z Lock” installation
• Made from expanded cellular PVC that lasts forever
• Virtually maintenance-free. Perfect for both interior and exterior applications
• Colulmns have been the same for years. Mix it up a litte! Be on trend

Art Deco

Artisan

Arts & Crafts

Atlas

Bondi

Bungalow

Calico

Cedar Park

Chevron Modern

Coastal

Gilcrest

Gypsum

Hampton

Hastings

Herringbone Modern

Imperial

Kinsman

Koroluck

Large Marrakesh

Magnolia

Manchester

Medium Marrakesh

Mid-Century

Mosaic

Nouveau

Paisley

Paramount

Pueblo

Riviera

San Antonio Mission Style

San Carlos Mission Style

San Juan Capistrano

San Miguel Mission Style

Shaker

Westmore

X-Board Farmhouse

Zion

Art Deco

Artisan

Arts & Crafts

Atlas

Bondi

Bungalow

Calico

Cedar Park

Chevron Modern

Coastal

Gilcrest

Gypsum

Hampton

Hastings

Herringbone Modern

Imperial

Kinsman

Koroluck

Large Marrakesh

Magnolia

Manchester

Medium Marrakesh

Mid-Century

Mosaic

Nouveau

Paisley

Paramount

Pueblo

Riviera

San Antonio Mission Style

San Carlos Mission Style

San Juan Capistrano

San Miguel Mission Style

Shaker

Westmore

X-Board Farmhouse

Zion

ENDURA-CRAFT™ NON-TAPERED COLUMN SPECIFICATIONS

Craftsman columns are available plain, or with three different paneled options: raised panel, “square corner” raised panel, and recessed panel. (Since all tooling used for routing the panels is done with round bits, there will always be some radius in the corners. The “square corner” style uses the smallest bit possible to minimize that radius – about 1/8”.)

	Shaft Dimensions		Panel & Flute Spacing		Panels		Flutes
	Outside	Inside	From Bottom	From Top	From Side	Route Width
Nominal Width	B	C	D	E	G	F	Number of	Width
6″	5-5/8″	4-3/8″	16-3/4″	8-1/2″	1-1/4″	3/4″	20	1/2″
8″	7-5/8″	6-3/8″	16-3/4″	8-1/2″	1-1/2″	1-1/4″	20	3/4″
10″	9-5/8″	8-3/8″	16-3/4″	8-1/2″	1-1/2″	1-1/4″	20	1″
12″	11-5/8″	10-3/8″	16-3/4″	8-1/2″	1-1/2″	1-1/4″	20	1-1/4″
14″	13-5/8″	12-3/8″	16-3/4″	9″	2″	1-1/4″	24	1-1/4″
16″	15-5/8″	14-3/8″	16-3/4″	9-1/4″	2-1/4″	1-1/4″	28	1-1/4″
18″	17-5/8″	16-3/8″	16-3/4″	9-1/2″	2-1/2″	1-1/4″	32	1-1/4″
20″	19-5/8″	18-3/8″	16-3/4″	9-3/4″	2-3/4″	1-1/4″	36	1-1/4″
22″	21-5/8″	20-3/8″	16-3/4″	10″	3″	1-1/4″	40	1-1/4″
24″	23-5/8″	22-3/8″	16-3/4″	10-1/4″	3-1/4″	1-1/4″	44	1-1/4″

ENDURA-CRAFT™ NON-TAPERED COLUMN CAPITALS & BASES

Standard
	Base		Capital
	Width	Height	Width	Height
	A		B
6″	6-5/8″	9-1/4″	6-5/8″	7-1/4″
8″	8-5/8″	9-1/4″	8-5/8″	7-1/4″
10″	10-5/8″	9-1/4″	10-5/8″	7-1/4″
12″	12-5/8″	9-1/4″	12-5/8″	7-1/4″
14″	14-7/8″	9-1/4″	14-7/8″	7-1/4″
16″	16-7/8″	9-1/4″	16-7/8″	7-1/4″
18″	18-7/8″	9-1/4″	18-7/8″	7-1/4″
20″	20-7/8″	9-1/4″	20-7/8″	7-1/4″
22″	22-7/8″	9-1/4″	22-7/8″	7-1/4″
24″	24-7/8″	9-1/4″	24-7/8″	7-1/4″

Mission
	Base		Capital
	Width	Height	Width	Height
	A		B
6″	7-5/8″	9-1/4″	7-5/8″	7-1/4″
8″	9-5/8″	9-1/4″	9-5/8″	7-1/4″
10″	11-5/8″	9-1/4″	11-5/8″	7-1/4″
12″	13-5/8″	9-1/4″	13-5/8″	7-1/4″
14″	15-5/8″	9-1/4″	15-5/8″	7-1/4″
16″	17-5/8″	9-1/4″	17-5/8″	7-1/4″
18″	19-5/8″	9-1/4″	19-5/8″	7-1/4″
20″	21-5/8″	9-1/4″	21-5/8″	7-1/4″
22″	23-5/8″	9-1/4″	23-5/8″	7-1/4″
24″	25-5/8″	9-1/4″	25-5/8″	7-1/4″

Tuscan
	Base		Capital
	Width	Height	Width	Height
	A	B	C	D
6″	8″	3-7/32″	8-7/16″	2-1/32″
8″	11-3/8″	4-1/4″	11-1/4″	2-11/16″
10″	13-1/2″	5-1/4″	13-7/32″	3-9/16″
12″	17″	6″	17-1/4″	3-7/8″
14″	18-5/8″	7-1/2″	19″	5″
16″	20-5/8″	7-1/2″	21″	5″
18″	22-5/8″	7-1/2″	23″	5″
20″	24-5/8″	7-1/2″	25″	5″
22″	26-5/8″	7-1/2″	27″	5″
24″	28-5/8″	7-1/2″	29″	5″

Prairie
	Base		Capital
	Width	Height	Width	Height
	A		B
6″	8-1/8″	3-1/4″	8-1/8″	3-1/4″
8″	10-1/8″	3-1/4″	10-1/8″	3-1/4″
10″	12-1/8″	3-1/4″	12-1/8″	3-1/4″
12″	14-1/8″	3-1/4″	14-1/8″	3-1/4″
14″	16-1/8″	3-1/4″	16-1/8″	3-1/4″
16″	18-1/8″	3-1/4″	18-1/8″	3-1/4″
18″	20-1/8″	3-1/4″	20-1/8″	3-1/4″
20″	22-1/8″	3-1/4″	22-1/8″	3-1/4″
22″	24-1/8″	3-1/4″	24-1/8″	3-1/4″
24″	26-1/8″	3-1/4″	26-1/8″	3-1/4″

Crown
	Base		Capital
	Width	Height	Width	Height
	A		B
6″	9-5/8″	3″	9-5/8″	3″
8″	11-5/8″	3″	11-5/8″	3″
10″	13-5/8″	3″	13-5/8″	3″
12″	15-5/8″	3″	15-5/8″	3″
14″	17-5/8″	3″	17-5/8″	3″
16″	19-5/8″	3″	19-5/8″	3″
18″	21-5/8″	3″	21-5/8″	3″
20″	23-5/8″	3″	23-5/8″	3″
22″	25-5/8″	3″	25-5/8″	3″
24″	27-5/8″	3″	27-5/8″	3″

ENDURA-CRAFT EASY INSTALLATION

E-Z Lock Assembly: Vertical edges of Craftsman shafts (tapered, non-tapered, pedestal and newel post styles) all incorporate the E-Z Lock miter joint for consistently straight miters.

Please note the correct assembly of the E-Z Lock joint shown at the left. Nails MUST be installed only in the edges shown (3 and 4). Installing on the other edges may result in open seams.

1. Glue both joint edges; slide first joint together
2. Push second joint closed
3. Nail this joint first
4. Nail this joint second

Notes
Always use non-corrosive fasteners — galvanized, stainless steel, etc. for exterior installations, and always follow glue and paint manufacturer’s instructions.

*Column must not be allowed to collect water, debris, etc. If the top of the column extends beyond the soffit/beam, the cap must be flashed with lead, copper, aluminum, etc. to prevent entry of water or foreign materials.

ABOUT ENDURA-CRAFT COLUMN MATERIALS

Made of cellular PVC that resists the tests of time and weather, Endura-Craft Columns are the best high-performance product on the market. Choose from our inspired collection of Endura-Craft Columns to add elegant details in a variety of applications.

PVC IS BEAUTIFUL

While Endura-Craft Columns readily accept paints and stains, it comes in a crisp, semi-matte white finish. Its profile is white throughout, and it’s protected with UV inhibitors, making it resistant to fading or yellowing over time. And, with sealed edges, they are easier to clean even if it does get dirty.

PVC IS WORKABLE

Craft a work of art with materials that are easily milled, shaped, and molded using standard woodworking tools. Endura-Craft Columns can be routed and cut without chip outs, fastened close to edges without splits, and can easily be trimmed using standard woodworking tools. They’re also easy to install—saving you time and labor costs.

PVC IS DURABLE

With Endura-Craft Columns, you can feel confident your products will provide years of beauty. Cellular PVC offers superior dent and scratch resistance and is moisture and insect resistant as well. PVC’s rigid make-up offers great protection and is suitable for ground and masonry contact. By following the recommended paint guides for PVC, it is ideal for interior and exterior applications.

PVC IS WORKABLE

Expanded PVC products are created from a high-density, rigid plastic-like material. It is rolled and pressed out into a form that can then be cut, drilled, machined, nailed, glued, and screwed just like wood, or metal.. It has superior screw and staple retention. The end result is a strong, low maintenance product.

ENDURA-CRAFT PANEL STYLES

Plain

Fluted

Raised Panel

“Square Corner” Raised Panel

Recessed Panel

“Square Corner” Recessed Panel

Chamfered Raised Panel

Installation & Technical Guides. Get it done right

ENDURA-CRAFT HELPFUL VIDEOS